Mechanical Engineering Project Topics with Materials:

ABSTRACT Wheelbarrow is a simple machine, which belong to the second-class lever. This is because the load or resistance is placed between the effort and the fulcrum. It is used in many areas of work to convey loads that are too heavy or bulky to be carried by hand. Wheelbarrow can be used as farm equipment, industrial equipment among others.... Continue Reading

ABSTRACT When it comes to construction projects, landscaping work, and gardening, you need the right kind of equipment to finish tasks speedily and easily. One piece of equipment you would need is a motorised wheelbarrow. This is intended to carry bulky materials and heavy loads. There are a lot of equipments that can be used these days for... Continue Reading

ABSTRACT This wrote up is a detail of the processes for the physical realization of the design and construction of mobile deep freezer. It is divided into chapters which discussed expensively the practical refrigeration cycle with rull attention given to design factors working principals and choice of material. Also considered were fabrication... Continue Reading

ABSTRACT In the society at large Technology is fast replacing the crude method of carrying out work and has been making room for employment. Besides, it has also caught the attention of the youths who will prefer to work in a company with technological operations than one with man-power operations. This project can be used to convey materials... Continue Reading

INTRODUCTION REFRIGERATION Refrigeration is a branch of science that deals with the process of removing heat from a substance or space in order to make it cooler. Refrigerator is defined as a device that is used in cooling the internal temperature below the room temperature (that is between 250C to 300C). Generally, however, for a space or... Continue Reading

ABSTRACT This Nylon sealing and cutting machine has an added advantage of making 800 sealed bags per hour. The constructional machines were sourced locally. The machine can cut and seal Nylon at a affordable cost. The constructional size of 31 cm x 7.5cm x 12.4 which comprises the following component. The sealing and cutting filament, the... Continue Reading

INTRODUCTION The production of bench shearing machines to reduce, alleviate and probably eliminate suffering, time, money, wastage of material and more especially the need for technological break through and self reliance has been a major concern of the federal government. Metal shearing and shaping has been a tiring problem in the society from... Continue Reading

INTRODUCTION This project of fabrication of single face pressurized kerosene cooker is a copied design. It is a manually operated type of stove, which has the capacity of supplying heat energy at high and low temperature. The type of stove so designed here do the industrial type with one burner.  Since the introduction of this pressurized... Continue Reading

By definition, penetrant testing (PT) is the resurgence of a liquid (or a gas) from a discontinuity in which it had previously been introduced during a penetration operation. A logical extension of the visual examination, this method makes it possible to detect discontinuities opened to the surface of the controlled part in the form of colored or... Continue Reading

ABSTRACT The study explored the prospects and challenges in the informal auto-mechanic sector focusing on auto-mechanics enterprises within the Kumasi Metropolis. Specifically, the study sought to examine the prospects of the auto-mechanic enterprises, examine the challenges facing auto-mechanic enterprises, and the preparedness of auto-mechanics... Continue Reading

The fast growing and developing population of the world is so busy that instant food noodles are gaining ground for both humans and domestic animals. Incidentally, the machines involved in the production of these food noddle extruders are imported which results in the depletion of our foreign exchange reserve. Consequently, there is a growing need... Continue Reading

odel with and Without Winglet Altab Hossain a *, Prithvi Raj Arora b , Ataur Rahman c , Abdul Aziz Jaafar b , A.K.M. Parvez Iqbal a a Department of Mechanical Engineering, University Industry Selangor, Jln Timur Tambahan, 45600 Batang Berjuntai, Selangor Darul Ehsan, Malaysia b... Continue Reading

ABSTRACT The fabrication of the solar dryer was successful and test were carried out for various performance comparisons such as No-load and Load performance of the dryer and direct sun drying comparison and noticeable differences was noticed in the final moisture content such that the maximum temperature recorded in the drying chamber and solar... Continue Reading

This project covers a study of the effect of seawater corrosion on 0.34% and 0.36% carbon steel compositions. Two (2) specimens (steel rods) of length 150mm (each) for both steel compositions were obtained. Out of each was gotten four (4) specimens of 10mm length, 10mm diameter and two (2) specimens of 50mm length, 10mm diameter. This yielded a... Continue Reading

PREFACE The electrical popcorn machine is a device for preparing especial popcorn for the human consumption. The device in produced to help the masses to be self valiance in this are of down trodden economy. This project work is divided into five chapters, chapter one; the introduction discusses the relevance of the project work, problems it is... Continue Reading

ABSTRACT The air of this project is to design and fabricate a bench shearing machine which can complete favorably with the imported ones. this machine is designed and fabricate, using our cheap and available materials. Some qualities such as durability, reliability and portability are guaranteed. It is functional and can cut or shear a metal of up... Continue Reading

ABSTRACT This Nylon sealing and cutting machine has an added advantage of making 800 sealed bags per hour. The constructional machines were sourced locally. The machine can cut and seal Nylon at a affordable cost. The constructional size of 31 cm x 7.5cm x 12.4 which comprises the following component. The sealing and cutting filament, the... Continue Reading

ABSTRACT This report covers all activities candied out to rehabilitate a faulty refrigerator. First and foremost, we diagnosed the faulty refrigerator using the basic instruments to know the faults. After which we bought the necessary standard items that caused the fault.  We then started work on it by replacing necessary instruments.  We... Continue Reading

ABSTRACTS The fabrication of a pressurized kerosene oven. This project has been fabricated with special economical needs for the small scale baking industries, wholesalers and distributors who import this type of baking oven from outside the country to supply the customers who wish to use it or those that cannot after gas oven can be used in... Continue Reading

ABSTRACT FLUSHING OF THE CONDENSER The refrigerant gas let into the condenser through the compressor and the vacuum pump was connected to the condenser to absorb dirty. REFILLING OF GAS INTO THE COMPRESSOR Gas was refilled into the compressor due to shortage of gas and it was filled inside the charging value and refrigerant. CHANGING OF DRIVER... Continue Reading

ABSTRACT The project is about fabrication of wheel-barrow, which is fabricated in Mechanical Engineering workshop in Institute of Management and Technology, Enugu. The report comprises seven chapters. Chapter one is about the introduction of the wheel. Chapter two is about the literature review, chapter three is about the material selection and... Continue Reading

ABSTRACT Knowledge could only be obtained successively by the use of books for research. This can be achieved only by preserving books already purchased. As a result we fabricate a metallic shelf made up of metallic sheet. Precisely mild steel sheets. The mild steel used for the fabrication of the shelf is 1.5mm (16gauge) mild steel. The shelf is... Continue Reading

ABSTRACT This project aims at designing and constructing a book metallic shelf hose capability will be to contain different standard sizes of books at minimum paces. What is taken into consideration in this project are the cost of its production, processes, and maintenance. Other considerable factors are the functional aspect of the... Continue Reading

ABSTRACT In the society at large Technology is fast replacing the crude method of carrying out work and has been making room for employment. Besides, it has also caught the attention of the youths who will prefer to work in a company with technological operations than one with man-power operations. This project can be used to convey materials... Continue Reading

ABSTRACT Construction of a potable electric operated motor vehicle for long Volvo Bus. In this project involves the knowledge of mechanical engineering workshop technology and engineering material science and strength. This was exactly what we were taught. We contracted the electric car with the actual dimension of long Volvo bus(Ml-) got from the... Continue Reading