Chemical Engineering Project Topics with Materials:

ABSTRACT The refurbishment of the fluid flow demonstration unit was carried out in the Chemical Engineering pilot plant laboratory of the Institute of Management and Technology Enugu. The refurbishment process was carried out to ensure adequate functioning of the unit, to allow the continuous use of equipment in the pilot plant, so that student... Continue Reading

ABSTRACT   The kinetics and optimization of inhibitive action of leaves extract of pawpaw, Azadirachta indica (neem tree) and bitter leaf on corrosion of mild steel in acidic medium was studied by weight loss technique using central composite design of response surface methodology for optimization. The metal was analyzed using Atomic Absorption... Continue Reading

ABSTRACT Nowadays, the destruction and pollution of humane environment has produced an ever growing awareness worldwide of the need for more effective sedimentation processes. The main aim of this project was to design and fabricate an experimental sedimentation rig with the objective to determine the rate of settling against time using calcium... Continue Reading

ABSTRACT Nowadays, the destruction and pollution of humane environment has produced an ever growing awareness worldwide of the need for more effective sedimentation processes. The main aim of this project was to design and fabricate an experimental sedimentation rig with the objective to determine the rate of settling against time using calcium... Continue Reading

ABSTRACT Nowadays, the destruction and pollution of humane environment has produced an ever growing awareness worldwide of the need for more effective sedimentation processes. The main aim of this project was to design and fabricate an experimental sedimentation rig with the objective to determine the rate of settling against time using calcium... Continue Reading

EXECUTIVE SUMMARY This work presents the design of a plant that will produce 250000kg/yr of lindane from benzene, chlorine and water at high temperature and pressure using direct chlorination method. The feeds are sent into a chlorinator, the crude product from the chlorinator is continuously decanted into a decanter and the bottom product HCl is... Continue Reading

EXECUTIVE SUMMARY This work presents the design of a plant that will produce 250000kg/yr of lindane from benzene, chlorine and water at high temperature and pressure using direct chlorination method. The feeds are sent into a chlorinator, the crude product from the chlorinator is continuously decanted into a decanter and the bottom product HCl is... Continue Reading

Oil obtained from orange peels and velvet tamarind nut by solvent extraction (n-hexane and acetone) using the soxhlet extractor were investigated as feedstock’s to determine some of the suitable parameters such as iodine value, saponification value, specific gravity, density, acid value and free fatty acid value, and their percentage yield that... Continue Reading

Environmental pollution as a result of drilling and mining activities in areas where deposits of petroleum and oil are found, proved a great threat to the wellness of the fauna and flora as well as to the humans.  TABLE OF CONTENTS  Background of study literature review Oil pollution act of 1990 Diesel Chemical composition  Volatility of Diesel... Continue Reading

Environmental pollution as a result of drilling and mining activities in areas where deposits of petroleum and oil are found, proved a great threat to the wellness of the fauna and flora as well as to the humans.  TABLE OF CONTENTS  Background of study literature review Oil pollution act of 1990 Diesel Chemical composition  Volatility of Diesel... Continue Reading

ABSTRACT Cassava is considered as a potential source for the commercial production of bioethanol because of its availability and low market price. It can be used as a basic source to support large-scale biological production of bioethanol using microbial amylases. With the progression and advancement in enzymology, starch liquefying and... Continue Reading

In preparation and characterization of adsorbent obtained from corn curbs, potassium hydroxide was used as an activating agent at ratio of 1:1, 7:8 and 3:4 with the corn curbs and their pH values were found to be 8.5, 8.03 and 8.0 respectively, ash content were found to be 41.56, 46.78 and 48.31wt%. The BET surface area values were 17.762461,... Continue Reading

Abstract Waste plastic disposal and excessive use of fossil fuels have caused environment concerns in the world. Both plastics and petroleum derived fuels are hydrocarbons that contain the elements of carbon and hydrogen. The difference between them is that plastic molecules have longer carbon chains than those in LPG, petrol, and diesel fuels.... Continue Reading

Engine oils are made from crude oil and its derivatives by mixing of certain other chemicals (additives) for improving their certain properties. Lubricating oil is used to lubricate moving parts of engine, reducing friction, protecting against wear, removing contaminants from the engine, act as a cleaning agent, and act as an anti corrosion and... Continue Reading

Cultivation of microalgae on municipal waste water Extraction of the oil from the algae cells. Production of biodiesel from the algae oil. Characterization of the biodiesel produced. Chapter 1 Introduction 1.1 Background 1.2 Statement of Problem 1.3 Aims and Objectives of Study 1.4 Significance of Study 1.5 Scope of Study Chapter 2 Literature... Continue Reading

It is of no doubt that one day, fossil fuels, which the whole world highly depends on, will come to a halt in a few decades to come. To this reason, researches have been geared towards alternative sources of energy: biodiesel, a form of renewable energy (energy that can be regenerated once used up), is one that has been made known and being tested... Continue Reading

ABSTRACT The  adsorptive  removal  of  the  colour  pigment  (due  to  high  content  of  carotenoids)  from  palm oil  using  ortho-phosphoric  acid  activated  kaolin  clay  was  investigated  in  this  research.  The clay  was  activated  at  different  acid  concentrations  to improve  its  adsorptive... Continue Reading

ABSTRACT In account form analysis, a lot of discrepancies causes by manual aspect of the form such as: lost of form, inability to correct intakes, poor storage facilities have been a problem in the May fresh savings and loan limited account form. But in recent times, the computer has come to the aid of our banks, May fresh in particular. The... Continue Reading

ABSTRACT A table top liquid-liquid extraction unit was constructed. The project also involved the repair and servicing of peristaltic suction pump, by painting it, replacing the connecting cord to the power supply, refilling of the work out suction plates, teeth and general servicing of the equipment. The glass absorption columns were provided as... Continue Reading

ABSTRACT The design and construction of s refrigerating unit is handled from the knowledge of the working principles of laws of thermodynamics. The size of the containing vessel i.e the case as established to be of 45cm by 32 cm in dimension. The Angle iron mild steel to used in the fabrication and welding. The box case of two layers are... Continue Reading

ABSTRACT This study has its theme as a utilization studies of Enugu coals with the view of studying its properties, classification, preparation storage etc comparing coals obtained from different locations. The Enugu coal is a sub-bitummous and non coking coal. It is very rich in waxes and resins, thus it may be suitable for the production of... Continue Reading

ABSTRACT This project “Characteristics Of Local Produced Oil From Groundnut Oil” was carried out using ten cups of groundnut seeds that was purchased from a local market in Enugu metropolis. The oil these seeds were in Enugu using solvent extraction method. Two different solvents were used in the extraction namely: Ethane and order to compare... Continue Reading

ABSTRACT The purpose of the project is to study the effect of liquid flow rate and gas flow rate on the pressure drop in a packed absorption tower and also to repair and restore the packed absorption tower to good working condition. Trouble shooting revealed that the exit drain value was broken due to carelessness on the part of former user of the... Continue Reading

ABSTRACT The production of the soap was carried out using all the necessary equipments like the reactor, mould, stirrer, hygrometer guage etc. and all the required reagents for soap production in correct proportion. In the production, palm kernel oil (P.K.O) was used instead of tallow or grease. This was because soap produced from grease or tallow... Continue Reading

ABSTRACT After detailed study on machines and levers, the construction work started as follows:- Making out, pattern development, cutting filling, drilling, machining, assembling, welding and finishing. Detailed procedures carried out is located at the sequence of operation in subsequent pages. The machine has scale of 1:5 in all parts of its... Continue Reading