All Project Topics with Materials - Page 1503

CONSTRUCTION OF A JUICE EXTRACTOR MACHINE ABSTRACT This project (construction of a simple size reduction machine) it was constructed locally with the use of local materials and tools in I. M. T. mechanical engineering workshop. The various parts of the equipment were constructed separately using mild steel before finally coupled. During the... Continue Reading
CONSTRUCTION OF A “CHEMICAL RACK” ABSTRACT The project done was a metal chemical rack. The rack was made of steel, which is soft to cutting, blending and several other operations applied to the metal during construction. The main purpose of constructing this metal rack is to be used for storing chemicals in the laboratory for easy... Continue Reading
ABSTRACT The construction of the 500 gallous (2,250 litre) of water is a project which has definite mathematical patterns. The choice of a cylindrical pattern of design involved the application of mathematical deductions to analyse the size of materials required. The introductory and scope... Continue Reading
ABSTRACT This research project is aimed at producing domestic powder and consequently, three different types of powder were produced, namely, simple face powder (pan-cake), medicated/Antiseptic powder (dristing powder). During the various production Talcum, Zinc-oxide, Perfume, Menthol, Tragasan 300 DP (Triclosan),... Continue Reading
WAYS OF ERADICATING COMMUNICABLE DISEASES AMONG PRIMARY SCHOOL PUPILS IN OVIA NORTH EAST LOCAL GOVERNMENT AREA OF EDO STATE ABSTRACT This project work was designed to find out the communicable diseases among primary school pupils in Ikpoba Okha Local Government Area. Communicable diseases are very common among primary pupils. Communicable diseases... Continue Reading
  • Type:Project
  • ID:BIO0004
  • Department:Biology
  • Pages:43
  • Chapters:5
  • Methodology:simple percentage
  • Reference:YES
ABSTRACT Agbazilo Local Government Area which is made up of many villages and towns have their headquarters at Ubiaja. This area is rich in coconut palm (cocos nucifera) this project therefore, reveals some of the economic uses of coconut palm products and how they can... Continue Reading
  • Type:Project
  • ID:BIO0003
  • Department:Biology
  • Pages:49
  • Chapters:5
  • Methodology:simple percentage
  • Reference:YES
ABSTRACT The construction of Sieve Industrial Sieve Compartment was carried out in the Engineering Workshop, Institute of Management and Technology, Enugu. The aim of this project is to fabricate an industrial sieve compartment which is capable of separating solid particles of... Continue Reading
ABSTRACT This project give a summary of the entire research study which was designed to find out the way and the way forward in the treatment and prevention of sexually transmitted disease in Egor Local Government Area of Edo State. This... Continue Reading
  • Type:Project
  • ID:BIO0002
  • Department:Biology
  • Pages:43
  • Chapters:5
  • Methodology:simple percentage
  • Reference:YES
ABSTRACT Attempt has been made in this study to examine the effects of motivation on the performance of teachers, a case study of some selected secondary schools in Eso-Odo Local Government Area, Ondo State. The hypothesis gotten from... Continue Reading
  • Type:Project
  • ID:BIO0001
  • Department:Biology
  • Pages:49
  • Chapters:5
  • Methodology:simple percentage
  • Reference:YES
ABSTRACT Wheel barrow can be defined as a simple machine used in transferring heavy loads materials from one place to another by pushing. It can be used or serve as farm equipment, industrial equipment and for other purpose. How ever, mateials used for the cnstruction of wheelbarrow are bought in standard... Continue Reading
ABSTRACT This project work is on the bleaching of palm oil using activated charcoal. The charcoal used for this work was made from pieces of animal bone by carbonization method. It was then activated into two different samples. Firstly, the basic sample was activated using anaphoric acid (H2 s04)... Continue Reading
ABSTRACT The construction of Sieve Industrial Sieve Compartment was carried out in the Engineering Workshop, Institute of Management and Technology, Enugu. The aim of this project is to fabricate an industrial sieve compartment which is capable of separating solid particles of various sizes. The... Continue Reading
ABSTRACT A cupboard in its proper term. Is a well shaped structure, which could either be rectangular, square or oval in shape, used for the storage of valuables at homes, and offices. Reniff defined cupboard as a rectangular shaped structure of cabinet that accommodates, or is used to keep details for future use.... Continue Reading
ABSTRACT Blender is an electric machine for size reducing soft food or liquid mixture. Blender is some time called liquidizer consists of a glass jar or jug containing a steel blade assembly at the base driven by a small electric motor. Construction of blender was done based on the principle of size of reduction using... Continue Reading
CONSTRUCTION OF A PILOT MOTORISED MIXER A REPORT PRESENTED TO THE DEPARTMENT OF CHEMICAL ENGINEERING OF THE INSTITUTE OF MANAGEMENT AND TECHNOLOGY, ENUGU ABSTRACT A motorized mixer of 200 liters capacity was constructed to have the capability of mixing 200 liters of fluid during operation. The construction of the mixer involves the preliminary... Continue Reading
TABLE OF CONTENT CHAPTER ONE Introduction CHAPTER TWO 2.0 Literature Review 2.0.1 Classification of heat Exchanger 2.0.2 Categories of heat exchangers 2.0.3 Types of heat exchangers 2.0.4 Material for constructions 2.0.5 Tube shape and position 2.0.6 Firing 2.0.7 Heat source 2.0.8 Design... Continue Reading
THE POTENTIALS FOR A CO-OPERATIVE THRIFT CREDIT SOCIETY IN A HIGHER EDUCATION INSTITUTION (A CASE STUDY OF I.M.T, ENUGU) TABLE OF CONTENTS CHAPTER ONE 1.1 Background of the study/Introduction 1.2 Statement of Problem 1.3 Purpose of the Study 1.4 Scope of the Study 1.5 Significance of the Study 1.6 Definition of Term 1.7 Research Questions. CHAPTER... Continue Reading
THE USE OF LOCAL PIGMENTS AND EXTENDERS FOR FORMULATION & PRODUCTION OF EMULSION PAINT ABSTRACT The major aim of this project research work is to produce emulsion paint from locally sourced pigment & extenders. The materials used for the production was of local source. The major raw materials used for the production of the emulsion paint:... Continue Reading
ABSTRCT The experiment was carried out to analyze comparatively coal and coconut activated carbon. The coal sample used in bituminous and with density of 1300kg 1m3 tile coconut shell was used. The coal and coconut shell was first activated using phosphoric acid. The activated coal and... Continue Reading
ABSTRACT This project work-up deals on the design and construction of a single phase step down nations fermor, with raking IKVA, 240V/11OV, 80V 12U, 6V. It is a multi-circuit transformer that has one input as the primary and tappins to produce the... Continue Reading
ABSTRACT The aim of this project was to acquire the constructional and fabrication knowledge by we, the students of chemical engineering by constructing a steel bookshelf. This work exposed us to many things like material for engineering and their requirements. It also exposed us to other fields of engineering like... Continue Reading
THE DESIGN AND FABRICATION OF A CANDLE MOULDING MACHINE ABSTRACT The idea of producing “candle stick” brought the existence of fabricating a “candle moulding machine” which can produce a desired shape of a candle foe the benefit of mankind. In chapter 1, which is the research work of the project carried out, the problem encountered and the... Continue Reading
ABSTRACT The candle molding machine is a vital device which cannot be done without, in any nation. This is because of the indispensable role candle plays, especially when there is no either source of light. In order to enhance adequate supply to both urban and rural consumers, the... Continue Reading
ABSTRACT An inverter is an electronic device that converts direct current (DC¬) to alternating current (AC) the converted Ac can be at any required voltage and frequency with the use of appropriate transformers, switching and control circuit. It’s simple put, is an electronic box that makes household... Continue Reading
THE DESIGN AND CONSTRUCTION OF MINI RADIO BROADCAST TRANSMITTERAND AUDIO CONSOLE USING FREQUENCYMODULATION (FM) WITH POWER RATING OF 1 WATT ABSTRACT The early transmitter for radio broadcasting is so big and bulky that they do occupy numerous spaces. The circuitries are mainly designed with valves, which are big in sizes. With the advent of... Continue Reading