Explore Project Topics on: production of soap in the laboratory

PRODUCTION OF SURFACE ACTIVE AGENTS (LAUNDRY SOAP) IN CHEMISTRY LABORATORY ABSTRACT In this project work, the researcher analysed the properties of surface-active agents (laundry soap) to be an excellent cleanser because of its ability to remove stains from surfaces. The researcher work was based mainly on internet print out, textbooks and... Continue Reading

ABSTRACTS This project was aimed at producing a fine high quality toilet soap at a low cost which will be of used to home and commercial purposes. The toilet soap produced has its major components caustic potash, palm kernel oil (pKo) caustic soda and soda ash. Other additives are perfume, coaming agent, sodium tripotiphosphate (STPP), colour,... Continue Reading

ABSTRACTS This project was aimed at producing a fine high quality toilet soap at a low cost which will be of used to home and commercial purposes. The toilet soap produced has its major components caustic potash, palm kernel oil... Continue Reading

ABSTRACT The construction of soap cutting table, mould and cutters became inevitable as it’s importance in our industries and society could not be over emphasized. When one considers the money at hand, he decides whether to start from the primary production level or secondary... Continue Reading

ABSTRACT The construction of soap cutting table, mould and cutters became inevitable as it’s importance in our industries and society could not be over emphasized. When one considers the money at hand, he decides whether to start from the primary production level or secondary... Continue Reading

ABSTRACT  The Production of Bar Soap is aimed at producing a cleansing agent which is capable of removing stains or dirt in man and his environment so as to reduce the population size of pathogenic micro-organisms. Soaps are salts of fatty acids. It is obtained by treating oils and fats with a strong alkaline solution. This... Continue Reading

SOAP PRODUCTION USING CHAMOMILE OIL Background of the study What is soap? Soaps are divided into two main types: Toilet and Industrial.These are few definition of soap. One of definition, soap is an alkali metal salt of a long-chain fatty acid and is manufactured using vegetable and animal fats. Besides, soap is a chemical compound or mixture of... Continue Reading

ABSTRACT The production of the soap was carried out using all the necessary equipments like the reactor, mould, stirrer, hygrometer guage etc. and all the required reagents for soap production in correct proportion. In the production, palm kernel oil (P.K.O) was used instead of tallow or grease. This was... Continue Reading

ABSTRACT The production of the soap was carried out using all the necessary equipments like the reactor, mould, stirrer, hygrometer guage etc. and all the required reagents for soap production in correct proportion. In the production, palm kernel oil (P.K.O) was used instead of tallow or grease.  This was because soap produced from grease or... Continue Reading

ABSTRACT The production of the soap was carried out using all the necessary equipments like the reactor, mould, stirrer, hygrometer guage etc. and all the required reagents for soap production in correct proportion. In the production, palm kernel oil (P.K.O) was used instead of tallow or grease. This was because soap produced from grease or tallow... Continue Reading

ABSTRACT The production of the soap was carried out using all the necessary equipments like the reactor, mould, stirrer, hygrometer guage etc. and all the required reagents for soap production in correct proportion. In the production, palm kernel oil (P.K.O) was used instead of tallow or grease. This was because soap produced from grease or tallow... Continue Reading

ABSTRACT The production of the soap was carried out using all the necessary equipments like the reactor, mould, stirrer, hygrometer guage etc. and all the required reagents for soap production in correct proportion. In the production, palm kernel oil (P.K.O) was used instead of tallow or grease.  This was because soap produced from grease or... Continue Reading

ABSTRACT Lemon grass (Cymbogon citratus) is an abundant, locally available plant. In this work, essential oil was extracted from it using solvent extraction method.  In this work two methods of extraction was used, solvent extraction and enfleurage methods were used to extract essential oil from lemongrass. Solvent extraction method yielded 2.08%... Continue Reading

ABSTRACT. The sole aim of this research work is to produce a high quality of bar soaps and compare with detergent. The major aspects of this projects deals with quality control processes in the production of a high quality bar soaps. In soap production, cold process was used and this was found out to be the most effective means of production... Continue Reading

ABSTRACT. The sole aim of this research work is to produce a high quality of bar soaps and compare with detergent. The major aspects of this projects deals with quality control processes in the production of a high quality bar soaps. In soap production, cold process was used and this was found out to be the most effective means of production... Continue Reading

ABSTRACT This research work focused on the application of environmental management systems in a soap production plant. An environmental management systems (EMS) is a tool used to implement a structure programme of continual improvement in environmental management system. It is a tool for managing the impacts of organization’s activities in the... Continue Reading

ABSTRACT This projects is aimed at knowing the process and quality factor in Laundary and Toilet Soap Projection. Various factors affected the quality of the soap produced. These include the method used in production, types and nature of oils used, the percentage of the additives... Continue Reading

ABSTRACT The research work is basically concerned with the international procurement and its justification. The research work covers the purchasing activities of Global Soap and Detergent Industry limited Ilorin. International buying is the procurement activities which involved source and obtaining needs or requirement from a foreign country for... Continue Reading

ABSTRACT Two medicated soaps and one local soap were investigated for their antibacterial activities against  Staphylococcus aureus . Identification of the bacteria species was by standard microbiological techniques which included colonial examination, gram staining, and biochemical testing. Minimum inhibitory and minimum bactericidal activities... Continue Reading

ABSTRACT Preparation of Local Soap involves the se of wood ash from the flowering plant of Daniello, Oliveri (Agba) Isoberllima doka (Achi), Parkia Clappertonwna (Ugba) and Eleasis guineensis (Nkwu) as the source for the caustic alkali were compared for performance.  The woody tissue of the local trees were burnt at the temperature of 250 \'... Continue Reading

DESCRIPTION The Liquid soap business plan is a comprehensive business plan that will assist you with all the needed ideas and plans to start a successful Liquid soap production business. The Liquid soap business plan shows you liquid soap making procedure and ingredients and in raising capital for your liquid soap business. liquid soap making... Continue Reading

ABSTRACT The aim of the project is to construct a soap cutting device capable of size-remaining the soap produced into regular bars and tablets without error in shapes and sizes. Soap cutting devices are used to size reduce or cut the bulk of soap produced into bars and tablets. Soap cutting devices facilitate... Continue Reading

ABSTRACT The aim of the project is to construct a soap cutting device capable of size-remaining the soap produced into regular bars and tablets without error in shapes and sizes. Soap cutting devices are used to size reduce or cut the bulk of soap produced into bars and tablets.  Soap cutting devices facilitate the process of cutting the produced... Continue Reading

ABSTRACT This work presents the raw materials and steps used in the refurbishment of microbiology laboratory at institute of management and technology. These material used include marble tiles, white cement, white glue, filling machine, cutting machine, board and nose mask the steps includes filling of the... Continue Reading

ABSTRACT This work presents the raw materials and steps used in the refurbishment of microbiology laboratory at institute of management and technology. These material used include marble tiles, white cement, white glue, filling machine, cutting machine, board and nose mask the steps includes filling of the... Continue Reading

ABSTRACT A mould can generally be defined as a pattern constructed for the production of the same shape and size. The constructional material differs from one operation to another. When one considers the money at hand, he decides whether to start from the primary production level or secondary... Continue Reading

ABSTRACT The sole aim of this research work is comparison and formulation of industrial Bar Soap and detergent. The major expert of this project deals with quality control processes in the production of a high quality bar soap and detergent. In synthetic detergent which was developed... Continue Reading

ABSTRACT This study examined the influence of billboard advertisement in the promotion of lux soap.  Advertising is one of the tools used for persuasive communication to target audience. Advertising is the communication relayed from companies to persuade an audience to purchase their products. For the sake of the effectiveness of the result of... Continue Reading

ABSTRACT A mould can generally be defined as a pattern constructed for the production of the same shape and size. The constructional material differs from one operation to another. When one considers the money at hand, he decides whether to start from the primary production level or secondary... Continue Reading

ABSTRACT Stabilized adhesive was developed and produced. The development was made by the production of samples of the adhesive with varied quantities of the active ingredients and the additives. From the various formulations made, it was observed that formulations A is the best for... Continue Reading