the use of palm oil fiber as an additive in concrete - Project Ideas | Grossarchive.com

Explore Project Topics on: the use of palm oil fiber as an additive in concrete

Related Works

ABSTRACT In an attempt to reduced non-renewable material usage, reduce green-house substances and at the same time be relevant to our environment, this research presents the progress of investigation going on to evaluate some properties of POEBA as partial replacement of cement in the production of structural concrete. This research work is... Continue Reading
ABSTRACT In an attempt to reduce non-renewable material usage, reduce green-house substances and at the same time be relevant to our environment, this research presents the progress of investigation going on to evaluate some properties of EPO-FBA as partial replacement of cement in the production of structural concrete. This research work is... Continue Reading
ABSTRACT Sand has traditionally been used as fine aggregate in structural concrete. It is usually imported from relatively distant places at high costs, and this increases the overall cost of making concrete and of providing housing in various Nigerian communities. This study investigates the performance of 409/o of laterite as fine aggregate in... Continue Reading
ABSTRACT Fiber optic communication systems have revolutionized the telecommunications industry, because it is used for faster transmitting of telephone signals, internet communication and cable television signal due to such lower attenuation and interference. The optical fibers are buried deep in the ground (1.2-1.5 meters) away from human... Continue Reading
ABSTRACT Fiber optic communication systems have revolutionized the telecommunications industry, because it is used for faster transmitting of telephone signals, internet communication and cable television signal due to such lower attenuation and interference. The optical fibers are buried deep in the ground (1.2-1.5 meters) away from human... Continue Reading
Abstract The study was carried out to determine the effects of Moringa oleifera leaf powder additive on the growth of layers, egg production and nutritive value of eggs. Specifically, the study sought to determine among others the effects of Moringa oleifera leaf powder fortified feeds and control feed on the growth of layers, effects of different... Continue Reading
ABSTRACT  In recent years there has been an increase in the number of construction works and  concrete is the main construction material for most of the structures that are being  built. Nigeria is a developing Country with a large population and land area therefore  a consumer of concrete. This paper considers the option of recycling concrete... Continue Reading
ABSTRACT  In recent years there has been an increase in the number of construction works and  concrete is the main construction material for most of the structures that are being  built. Nigeria is a developing Country with a large population and land area therefore  a consumer of concrete. This paper considers the option of recycling concrete... Continue Reading
The introduction Methodology Materials needed Characteristics of bacillus that can produce amylase isolated from Palm kernel waste water in the production of local palm oil Characteristics of bacillus specie that have the potential to bioflocculate isolated from Palm kernel waste water in the production of local palm oil Aim and objectives of the... Continue Reading
The introduction  Methodology Materials needed Characteristics of bacillus that can produce amylase isolated from Palm kernel waste water in the production of local palm oil Characteristics of bacillus specie that have the potential to bioflocculate isolated from Palm kernel waste water in the production of local palm oil Aim and objectives of... Continue Reading
ABSTRACT The main aim of the research is to study the mechanical properties of concrete and heir effects in concrete stability and failure. He fractures mechanical properties in particular uniaxial tensile strength Ft, young’s modules Eo and fractures energy Gf as sell as the shape of the stress strain and the stress- deformation relation  were... Continue Reading
ABSTRACT The main aim of the research is to study the mechanical properties of concrete and heir effects in concrete stability and failure. He fractures mechanical properties in particular uniaxial tensile strength Ft, young’s modules Eo and fractures energy Gf as sell as the shape of the stress strain and the stress- deformation relation  were... Continue Reading
  ABSTRACT This project is carried out to know the effects of salt water on concrete. Salt water has salinity of about 3.5%. in that, about 78% is sodium chloride and 15% is chloride and sulphate of magnesium. The result gotten from the experiment being carried out shows different result from the mix design, casting, curing and crushing of... Continue Reading
ABSTRACT In the sense that the materials involved in this project were capital intensive more especially cement, so in carrying out the work one must have to be careful in the selection and collection of materials to be used in the casting of the concrete. The materials used are coarse aggregate (granite) fine aggregate (sand). The coarse... Continue Reading
ABSTRACT In the sense that the materials involved in this project were capital intensive more especially cement, so in carrying out the work one must intensive to be careful in the selection and collection of materials to be used in the casting of the concrete. The materials used are coarse aggregate (granite) fine aggregate (sand). The coarse... Continue Reading
CHAPTER ONE1.0 INTRODUCTION1.1 Background of StudyThere   is   need   for   affordable   building  materials  in  providing adequate housing for  teamingpopulace   of  the   world.   The  cost  of   conventional   building   materials  continue   to  increase  asmajority of the population continues to fall below... Continue Reading
ABSTRACT The purpose of this project work is to assess the strength of No-fines concrete pavement. No-Fines concrete is use in low traffic volume, pathways, sidewalk and parking lots. No-fines concrete is produced by using ordinary Portland cement, coarse aggregates, and water. In this study, Two (2) batches of no-fines concrete each with two... Continue Reading
ABSTRACT In the sense that the materials involved in this project were capital intensive more especially cement, so in carrying out the work one must intensive to be careful in the selection and collection of materials to be used in the casting of the concrete. The materials used are coarse aggregate (granite) fine aggregate (sand). The coarse... Continue Reading
ABSTRACT The purpose of this project work is to assess the strength of No-fines concrete pavement. No-Fines concrete is use in low traffic volume, pathways, sidewalk and parking lots. No-fines concrete is produced by using ordinary Portland cement, coarse aggregates, and water. In this study, Two (2) batches of no-fines concrete each with two... Continue Reading
CHAPTER ONE 1.1 GENERAL INTRODUCTION The relevance of road to life and its activities cannot be over emphasized. Road is as old as the origin of man and plays a vital role in the life of the people in communities, states, countries. It is quite obvious that life would have been very difficult... Continue Reading
ABSTRACT In the sense that the materials involved in this project were capital intensive more especially cement, so in carrying out the work one must have to be careful in the selection and collection of materials to be used in the casting of the concrete. The materials used are coarse aggregate... Continue Reading
CHAPTER ONE INTRODUCTION 1.1 BACKGROUND TO THE STUDY Concrete is a versatile construction material. According to Hasan and Kabir (2011), it is readily available, relatively cheap, flexible to handle and it gives shape and any desired form. The compressive strength is the most critical... Continue Reading
ABSTRACT The purpose of this project work is to assess the strength of No-fines concrete pavement. No-Fines concrete is use in low traffic volume, pathways, sidewalk and parking lots. No-fines concrete is produced by using ordinary Portland cement, coarse aggregates, and water. In this study, Two (2) batches of no-fines concrete each with two... Continue Reading
CHAPTER ONE 1.0 INTRODUCTION 1.1 Background of Study There is need for affordable building materials in providing adequate housing for teaming populace of the world. The cost of conventional building materials continue to increase asmajority of the population continues to fall below the poverty line. Thus, there is the need tosearch for local... Continue Reading
CHAPTER ONE 1.0 INTRODUCTION 1.1 Background of Study There is need for affordable building materials in providing adequate housing for teamingpopulace of the world. The cost of conventional building materials continue to increase asmajority of the population continues to fall below the poverty line. Thus, there is the need tosearch for local... Continue Reading
ABSTRACT The Reliability Analysis of a Prestressed Concrete Beam (PCB) was presented using First Order Reliability Method and Eurocode 2 procedures to carry out the analysis. The results show that the safety of the PCBin bending decreasedfrom 2.9 to 1.0 and 3.1 to 2.6 as prestress force and the depth from the extreme compressive fiber to the... Continue Reading
ABSTRACT Concrete is a mixture of fine aggregate (sand), coarse aggregate (rock), cement, and water. The increasing demand of concrete for construction and development of infrastructure has drawn the attention of many researchers in searching for less expensive alternatives to the traditional materials employed in the construction industries in an... Continue Reading
PREFACE In structural detailing, the project is initiated by the structural engineer. The architectural drawings are prepared by the architect to the required scale and specification given to him by the client. The structural engineer designs the structural frame work of the building and specification required such as slab, beam, column and... Continue Reading
ABSTRACT The work has gone a long way in determining strength of concrete made of various aggregates such as granites stone, black gravel, washed gravel and surface gravel. Some factors such as porosity of the  aggregate temperature causing loss of water plate form for mixing of concrete mix affect the workability and eventually the strength of... Continue Reading
INTRODUCTION This work was obligated to present in one. The fundamental and practical information in the filed of the comparative analysis of the strength of concrete made from various aggregate which may be useful to people involve in civil and structural engineering and particularly, those that found pleasure in the design and related structure.... Continue Reading