Explore Project Topics on: production of ceiling board using clay and recycled high density polyehylene

ABSTRACT This project, Design and production of ceiling board using Plaster of Paris (POP) Gypsum materials. Gypsum is basically the raw material required in the manufacturing Plaster of Paris (POP) which posses an outstanding property  and a good material for producing ceiling board.  The materials procured for the project are plaster of Paris,... Continue Reading

CHAPTER ONE 1.0     INTRODUCTION           This project deals with the design and production of ceiling board using Plaster of Paris [POP] gypsum materials. Plaster of Paris [POP] is a white powdery mixture of gypsum. It has been named such because the first deposit of gypsum was found is Paris. This powder when mixed with water... Continue Reading

ABSTRACT This project “The Production of Ceiling Board from Local Raw Materials†was carried out basically using raw materials which was sourced locally. These raw materials are found to be very much in abundance. Some are materials sourced from the ground and others are from agricultural wastes. Three different types of ceiling boards... Continue Reading

ABSTRACT This project “The Production of Ceiling Board from Local Raw Materials” was carried out basically using raw materials which was sourced locally. These raw materials are found to be very much in abundance. Some are materials sourced from the ground and others are from agricultural wastes. Three different types of ceiling boards were... Continue Reading

ABSTRACT This project “The Production of Ceiling Board from Local Raw Materials” was carried out basically using raw materials which was sourced locally. These raw materials are found to be very much in abundance. Some are materials sourced from the ground and others are from agricultural... Continue Reading

ABSTRACT This project “The Production of Ceiling Board from Local Raw Materials” was carried out basically using raw materials which was sourced locally. These raw materials are found to be very much in abundance. Some are materials sourced from the ground and others are from agricultural wastes. Three different types of ceiling boards... Continue Reading

ABSTRACT Sanitation has been a thorny issue especially in many informal settlements all over the world with the third world countries being highly affected. Therefore people living in these affected areas are exposed to these deplorable conditions. Kenya is not spared either and therefore our informal settlements are suffering from myriad of... Continue Reading

ABSTRACT  In recent years there has been an increase in the number of construction works and  concrete is the main construction material for most of the structures that are being  built. Nigeria is a developing Country with a large population and land area therefore  a consumer of concrete. This paper considers the option of recycling concrete... Continue Reading

ABSTRACT  In recent years there has been an increase in the number of construction works and  concrete is the main construction material for most of the structures that are being  built. Nigeria is a developing Country with a large population and land area therefore  a consumer of concrete. This paper considers the option of recycling concrete... Continue Reading

ABSTRACT After clearing for crops, logging is the most important human-driven factor responsible for the reduction of forest cover in sub-Saharan Africa. In general, wood represents about 86% of household energy consumption and the demand is expected to rise to 45% over the next 30 years due to the population growth and increasing needs in this... Continue Reading

ABSTRACT After clearing for crops, logging is the most important human-driven factor responsible for the reduction of forest cover in sub-Saharan Africa. In general, wood represents about 86% of household energy consumption and the demand is expected to rise to 45% over the next 30 years due to the population growth and increasing needs in this... Continue Reading

ABSTRACT The production of high quality foam was carried.  The actualization of the production of polyurethane (fibre) foam was made possible by using the components / chemical raw materials such as polyol (polyurethes resin).  TDI (toluene di-Iso-cyanate, methylane chloride (MC)-(CH2CL).  Silicon oil, stannous octoate, calcum carbonate and... Continue Reading

ABSTRACT The production of high quality foam was carried.  The actualization of the production of polyurethane (fibre) foam was made possible by using the components / chemical raw materials such as polyol (polyurethes resin).  TDI (toluene di-Iso-cyanate, methylane chloride (MC)-(CH2CL).  Silicon oil, stannous octoate, calcum carbonate and... Continue Reading

ABSTRACT The production of high quality foam was carried. The actualization of the production of polyurethane (fibre) foam was made possible by using the components / chemical raw materials such as polyol (polyurethes resin). TDI (toluene di-Iso-cyanate, methylane chloride (MC)-(CH2CL). Silicon oil, stannous octoate, calcum carbonate and water. As... Continue Reading

ABSTRACT The production of high quality foam was carried. The actualization of the production of polyurethane (fibre) foam was made possible by using the components / chemical raw materials such as polyol (polyurethes resin). TDI (toluene di-Iso-cyanate, methylane chloride (MC)-(CH2CL). Silicon oil, stannous... Continue Reading

ABSTRACT A project was carried out to produce high quality liquid air refreshner for domestic uses. The project was carried out using the following apparatus. Beakers (250ML), one conical flask, hydrometer, thermometer, two – 5ml of measuring cylinders, one reactor (plastic reactor), stirrer,... Continue Reading

ABSTRACT A project was carried out to produce high quality liquid air refreshner for domestic uses. The project was carried out using the following apparatus. Beakers (250ML), one conical flask, hydrometer, thermometer, two – 5ml of measuring cylinders, one reactor (plastic reactor), stirrer, weighing balance. The chemicals used in the... Continue Reading

ABSTRACT. The sole aim of this research work is to produce a high quality of bar soaps and compare with detergent. The major aspects of this projects deals with quality control processes in the production of a high quality bar soaps. In soap production, cold process was used and this was found out to be the most effective means of production... Continue Reading

ABSTRACT. The sole aim of this research work is to produce a high quality of bar soaps and compare with detergent. The major aspects of this projects deals with quality control processes in the production of a high quality bar soaps. In soap production, cold process was used and this was found out to be the most effective means of production... Continue Reading

TABLE OF CONTENTS DECLARATION..........................................................................................................................ii APPROVAL............................................................................................................................... iii... Continue Reading

ABSTRACT Products that are made from recycled materials or are sustainably produced are becoming more common and popular globally as people become more environmentally aware. However, these products are often expensive or not widely available. In developing countries, additional obstacles to adoption of such products are lack of awareness and... Continue Reading

ABSTRACT Smallholder farmers of Apac District received advice from extension agents on the production of high quality cassava flour from 2009 to 2015. Despite training, production remained low at 4000kg ha-1 compared to the expected output of 8000kg ha-1 , which called for an investigation conceived to establish the effectiveness of the group... Continue Reading

ABSTRACT This study investigated the corrosion resistance of steel reinforcement in two types of concrete mixtures – ordinary Portland (OPC) used for concrete and clay pozzolana cement (CPC) used for concrete. These two concrete types were exposed to 3% and 5% (W/V) of Sodium Chloride (NaCl) and 3% (W/V) Calcium Hypochlorite (Ca(OCl)2) that... Continue Reading

ABSTRACT In recent times, most of the household appliances are using electric power and as such, electricity shortage has become a major problem throughout the world. Ceiling fan is one of such appliances that consume electric power. The best way to minimize the power consumption of the ceiling fan is to reduce the weight of the ceiling fan blade.... Continue Reading

ABSTRACT In recent times, most of the household appliances are using electric power and as such, electricity shortage has become a major problem throughout the world. Ceiling fan is one of such appliances that consume electric power. The best way to minimize the power consumption of the ceiling fan is to reduce the weight of the ceiling fan blade.... Continue Reading

CHAPTER ONE 1.0   INTRODUCTION As-built survey has been an essential element in the development of the human environment since the beginning of recorded history. It is performed to verify that a particular improvement on a parcel of land has been built according to the proposed design plans, specifications and setback requirement. It shows how... Continue Reading

Abstract Traffic management systems at road intersections of most African cities is based on fixed timings where equal length of green light is assigned to each lane at the intersection. This method of traffic management is inefficient because it causes unnecessarily long waiting times for vehicles at the intersections especially during periods... Continue Reading

ABSTRACT This work investigates the thermal properties of Polyvinyl Chloride (PVC), Plaster of Paris (POP), asbestos, and cardboard commonly used as ceiling materials. The steady state method for Lee’s disc apparatus was employed to determine these thermal properties which include, thermal conductivity, thermal resistivity, thermal diffusivity,... Continue Reading

ABSTRACT The  adsorptive  removal  of  the  colour  pigment  (due  to  high  content  of  carotenoids)  from  palm oil  using  ortho-phosphoric  acid  activated  kaolin  clay  was  investigated  in  this  research.  The clay  was  activated  at  different  acid  concentrations  to improve  its  adsorptive... Continue Reading

ABSTRACT The  adsorptive  removal  of  the  colour  pigment  (due  to  high  content  of  carotenoids)  from  palm oil  using  ortho-phosphoric  acid  activated  kaolin  clay  was  investigated  in  this  research.  The clay  was  activated  at  different  acid  concentrations  to improve  its  adsorptive... Continue Reading